When you’re ready to install your fence, start by preparing the ground. Sand and sandy soils require fast-setting concrete. The concrete should be the consistency of peanut butter and the post should be positioned level and straight. Once the concrete has cured, add the fence rails and brace the post. Once the concrete has fully cured, attach the panels to the posts. You can then add decorative items, such as ornamental trees, if desired.
The hardest part of the project is digging the posts and securing them. After this, you need to install the fence paneling. Be sure to measure them for plumb with a carpenter’s level. Then, tie the panels in a logical line. This will ensure the fence looks level and symmetrical. For a smooth finish, tie the rails flush against the posts and extend to the house. Once the panels are securely fastened, you can continue working on the fence.
Once you’ve figured out your property’s layout, you can determine the type of fence you want to install. You should determine what purpose your fence serves, and then sketch a design that best suits your needs. Remember that not all fences are the same height or style. Make several drafts and choose one you like best. If you’re not sure how to go about designing a fence, consult a Markham fence installation contractor for assistance. You can also consult with your neighbors about the design of their fences.
The next step is installing the fence post. Posts should be positioned so that their level after the concrete has dried. Make sure to use pour-ready concrete to fill the post holes. If the posts aren’t level, use cement to support them. Lastly, be sure to make sure that the fence posts do not rub or pull on each other. Leaving slack around the posts can cause the fence to slip or fall.
Posts should be installed one at a time, beginning with the end posts and finishing with the corner posts. The string lines should be a guide to where to place the posts. Repeat until the fence is complete. Once complete, make sure to double-check the spacing between posts. You can even use a string line to mark the height of the posts. If you’re using string lines, make sure to mark the heights of the posts before installing them.
After preparing the ground, the next step in fence installation is to install the fence posts. This step should take about an hour. A power auger is a great option for this task. It can be heavy and can cause injuries if it hits rocks or large tree roots. Be sure to have a second person stand by while using the power auger. This way, you won’t accidentally damage the ground. When putting up posts, be sure to check the ground for underground utilities and call 811 before you begin.
Before installing the fence, be sure to contact your local fence company in Markham. It may be necessary to call the utility company to arrange an inspection. They can assess the area and determine what kind of fence is allowed. In addition, they can help you choose the best layout for your fence. This will help you avoid future problems if you need to make repairs. You should also check the regulations of the homeowner’s association before starting the fence project. You might have to pay a fine if you fail to comply with the regulations.